Camera bodies
Canon PowerShot G7 X Mark III hard case with custom foam
The short answer
The Canon PowerShot G7 X Mark III measures 105.5 × 60.9 × 41.4 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Hard camera case: which one for your camera?
- Dimensions used
- 105.5 × 60.9 × 41.4 mm
- Stored as
- as is. Published dimensions exclude external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 63 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Canon PowerShot G7 X Mark III’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Canon PowerShot G7 X Mark III
Take the set closest to yours, then adjust it in the configurator.
Everyday
- Canon PowerShot G7 X Mark III
- SD card wallet
- Samsung T7
- Pocket: smartphone
S compact case, €189
How it is stored
The lens is fixed and stays on the camera. Switch the camera off, remove external accessories and measure the complete camera with any protection you keep for transport.
Size and price
The pocket cut for the Canon PowerShot G7 X Mark III
In the S case, the foam is cut at 51 × 115 mm on the floor for the Canon PowerShot G7 X Mark III: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 63 mm deep.
- Pocket footprint
- 51 × 115 mm
- Pocket depth
- 63 mm
- Foam under the pocket
- 39 mm
- Space left along the length
- 249 mm
- Space left across the width
- 112 mm
- Share of the inside volume used
- 4.1 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | canon.co.uk | 105.5 × 60.9 × 41.4 mm | — | external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Canon PowerShot G7 X Mark III: + larger, − smaller.
The Canon PowerShot G7 X Mark II measures 0.5 mm more in depth than the Canon PowerShot G7 X Mark III. Same recommended case size for both: the S.
| Model | Width (mm) | Height (mm) | Depth (mm) | Recommended case |
|---|---|---|---|---|
| Canon PowerShot G7 X Mark II | 0 | 0 | +0.5 | S |
| Canon EOS R50 V | +14 | +13 | +16 | S |
| Canon EOS R100 | +11 | +24.5 | +39.5 | S |
| Canon EOS R50 | +11 | +24.5 | +39.5 | S |
Often stored with the Canon PowerShot G7 X Mark III
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Canon PowerShot G7 X Mark III case
- Which case size for the Canon PowerShot G7 X Mark III?
- On its own, the Canon PowerShot G7 X Mark III fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 63 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Canon PowerShot G7 X Mark III?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.