Skip to content

Delivery included worldwide.

Foamd
Build my case

Custom cases for photography

A body, its lenses and batteries, each in its own pocket, so you grab the right lens without searching.

VideoDroneAudioCabin sizeOn wheels
3D render: the M case with an upright body, two f/2.8 zooms, a wireless mic and two batteries.
3D render: the M case with an upright body, two f/2.8 zooms, a wireless mic and two batteries.

Camera bodies (127)

Lenses (354)

Batteries (1)

Accessories (43)

Choosing the right case

A lens’s diameter is not enough to choose a case: its length with caps and the space for the body count too. List every reference and the accessories that stay mounted. The configurator compares their footprint with the case sizes, then you check the plan and the measurements.

A lens can lie down or stand up in the foam. Standing, its length becomes a depth constraint; lying down, it takes up floor space. Compare the two positions suggested for your kit, including the hood if it stays on the lens.

Questions about photo cases

How many lenses fit in the S case?

There is no number that works for every lens: diameter, length, position and the other devices change the result. Add your references to the configurator to see the suggested plan; also check the available depth and the dimensions with caps.

Is there room for the lens hood?

Yes, in its own pocket or reversed on the lens if you include it in the measurement. Tell the configurator by adding a custom item.

Can I store a flash or filters?

Yes: a flash is added as a custom item, and filters go in a free compartment or a pouch.

And if I change lenses next year?

You order the foam on its own, cut for your new kit, without buying the case again.

Preparing a kit for this use

A case for the R5 and the RF 24–105 F4

How do you prepare a photo case around a single zoom?

See the kit and the points to check →