Camera bodies
Custom case for Fujifilm GFX100 II
On its own, the Fujifilm GFX100 II fits in the L shoot case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the Fujifilm GFX100 II- Dimensions used
- 152.4 × 117.4 × 110.6 mm
- Stored as
- body cap on, +12 mm of depth (margin included)
- Dimension reliability
- Probable dimensions 66/100
- Clearance left in the foam
- 3.5 mm per side
- Weight
- 1,030 g
- Pocket depth
- 120 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.
Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.
Start from a kit with the Fujifilm GFX100 II
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
Fujifilm GFX100 II alone
- Fujifilm GFX100 II
L shoot case, €329
Adapt this kitEveryday
- Fujifilm GFX100 II
- SD card wallet
- SSD Samsung T7
L shoot case, €329
Adapt this kit
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
Often stored with the Fujifilm GFX100 II
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Fujifilm GFX100 II case
- Which case size for the Fujifilm GFX100 II?
- On its own, the Fujifilm GFX100 II fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 120 mm deep in 175 mm foam.
- How much clearance does the foam leave around the Fujifilm GFX100 II?
- 3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
- Does the case for the Fujifilm GFX100 II fit as cabin baggage?
- The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
- What about the Fujifilm GFX100 II’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my Fujifilm GFX100 II has accessories mounted?
- The layout follows the Fujifilm GFX100 II’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.
Other Fujifilm devices
- Fujifilm GFX100S II
- Fujifilm X-E4
- Fujifilm X-E5
- Fujifilm X-H2
- Fujifilm X-H2S
- Fujifilm X-M5
- Fujifilm X-Pro3
- Fujifilm X-S20