Gimbals
Custom case for DJI RS 4
On its own, the DJI RS 4 fits in the L shoot case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI RS 4- Dimensions used
- 244.2 × 115.9 × 251.1 mm
- Stored as
- folded. Manufacturer dimensions without the battery grip: you confirm your measurement before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 1,066 g
- Pocket depth
- 118 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI RS 4’s measurements before cutting, and we leave a little more clearance.
Start from a kit with the DJI RS 4
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
DJI RS 4 alone
- DJI RS 4
L shoot case, €329
Adapt this kitWith a monitor
- DJI RS 4
- 5-inch monitor
L shoot case, €329
Adapt this kit
How it is stored
The gimbal lies folded, axes locked, with the mounting plate removed to save thickness.
Size and price
Often stored with the DJI RS 4
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Foamd film-set multi-tool
Sold with its pocket, €24 · 125 × 55 mm
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI RS 4 case
- Which case size for the DJI RS 4?
- On its own, the DJI RS 4 fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 118 mm deep in 175 mm foam.
- How much clearance does the foam leave around the DJI RS 4?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
- Does the case for the DJI RS 4 fit as cabin baggage?
- The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
- What if my DJI RS 4 has accessories mounted?
- The layout follows the DJI RS 4’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.