Skip to content

Delivery included worldwide.

Foamd
Build my case

Gimbals

Custom case for DJI RS 4 Pro

On its own, the DJI RS 4 Pro fits in the XL wheels case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €449, delivery included, in 5 to 6 weeks (4 to 5 with express, +€25). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the DJI RS 4 Pro

See kits with this device

Dimensions used
289.5 × 167.3 × 267 mm
Stored as
folded. Manufacturer dimensions without the battery grip: you confirm your measurement before cutting.
Dimension reliability
To confirm 36/100
Clearance left in the foam
4.5 mm per side
Weight
1,242 g
Pocket depth
170 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI RS 4 Pro’s measurements before cutting, and we leave a little more clearance.

the wheel well (position still being measured)the handle channel (position still being measured)590 mm455 mm
Layout computed for the DJI RS 4 Pro alone in the XL case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the DJI RS 4 Pro

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • DJI RS 4 Pro alone

    • DJI RS 4 Pro

    XL wheels case, €449

    Adapt this kit

  • With a monitor

    • DJI RS 4 Pro
    • 5-inch monitor

    XL wheels case, €449

    Adapt this kit

How it is stored

The gimbal lies folded, axes locked, with the mounting plate removed to save thickness.

Size and price

Often stored with the DJI RS 4 Pro

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd film-set multi-tool

    Sold with its pocket, €24 · 125 × 55 mm

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Cables and adapters

    Empty pocket for your own, at no extra cost · 130 × 90 mm

Build the case and choose its storage

Questions about the DJI RS 4 Pro case

Which case size for the DJI RS 4 Pro?
On its own, the DJI RS 4 Pro fits in the XL case (590 × 455 × 255 mm inside), at €449 for case and foam, delivery included. Its pocket is 170 mm deep in 210 mm foam.
How much clearance does the foam leave around the DJI RS 4 Pro?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the DJI RS 4 Pro fit as cabin baggage?
The XL case measures 66.7 × 53.5 × 30.4 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
What if my DJI RS 4 Pro has accessories mounted?
The layout follows the DJI RS 4 Pro’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other DJI devices

Gimbals from other brands