Gimbals
Custom case for DJI RS 4 Mini
On its own, the DJI RS 4 Mini fits in the L shoot case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI RS 4 Mini- Dimensions used
- 236 × 64 × 316 mm
- Stored as
- folded
- Dimension reliability
- Probable dimensions 66/100
- Clearance left in the foam
- 3.5 mm per side
- Weight
- 890 g
- Pocket depth
- 66 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer, published review
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.
Start from a kit with the DJI RS 4 Mini
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
DJI RS 4 Mini alone
- DJI RS 4 Mini
L shoot case, €329
Adapt this kitWith a monitor
- DJI RS 4 Mini
- 5-inch monitor
L shoot case, €329
Adapt this kit
How it is stored
The gimbal lies folded, axes locked, with the mounting plate removed to save thickness.
Size and price
Often stored with the DJI RS 4 Mini
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Foamd film-set multi-tool
Sold with its pocket, €24 · 125 × 55 mm
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI RS 4 Mini case
- Which case size for the DJI RS 4 Mini?
- On its own, the DJI RS 4 Mini fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 66 mm deep in 175 mm foam.
- How much clearance does the foam leave around the DJI RS 4 Mini?
- 3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
- Does the case for the DJI RS 4 Mini fit as cabin baggage?
- The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
- What if my DJI RS 4 Mini has accessories mounted?
- The layout follows the DJI RS 4 Mini’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.