Skip to content

Delivery included worldwide.

Foamd
Build my case

Camera bodies

Custom case for Fujifilm GFX100S II

On its own, the Fujifilm GFX100S II fits in the M all-round case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Fujifilm GFX100S II

See kits with this device

Dimensions used
150 × 104.2 × 99.2 mm
Stored as
body cap on, +12 mm of depth (margin included)
Dimension reliability
Probable dimensions 66/100
Clearance left in the foam
3.5 mm per side
Weight
883 g
Pocket depth
107 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.

Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.

430 mm290 mm
Layout computed for the Fujifilm GFX100S II alone in the M case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Fujifilm GFX100S II

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Fujifilm GFX100S II alone

    • Fujifilm GFX100S II

    M all-round case, €239

    Adapt this kit

  • Everyday

    • Fujifilm GFX100S II
    • SD card wallet
    • SSD Samsung T7

    M all-round case, €239

    Adapt this kit

How it is stored

The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.

Size and price

Often stored with the Fujifilm GFX100S II

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Charger

    Empty pocket for your own, at no extra cost · 110 × 75 mm

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

Build the case and choose its storage

Questions about the Fujifilm GFX100S II case

Which case size for the Fujifilm GFX100S II?
On its own, the Fujifilm GFX100S II fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 107 mm deep in 123 mm foam.
How much clearance does the foam leave around the Fujifilm GFX100S II?
3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
Does the case for the Fujifilm GFX100S II fit as cabin baggage?
By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
What about the Fujifilm GFX100S II’s batteries on a plane?
These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
What if my Fujifilm GFX100S II has accessories mounted?
The layout follows the Fujifilm GFX100S II’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Fujifilm devices

Camera bodies from other brands