Skip to content

Delivery included worldwide.

Foamd
Build my case

Lenses

Custom case for Viltrox AF 16mm F1.8 FE (Sony E)

On its own, the Viltrox AF 16mm F1.8 FE (Sony E) fits in the M all-round case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Viltrox AF 16mm F1.8 FE (Sony E)

See kits with this device

Dimensions used
Ø 85.2 × 133 mm
Stored as
front and rear caps on, +30 mm of length (mount rear and caps, margin included); hood stored separately
Dimension reliability
To confirm 56/100
Clearance left in the foam
4.5 mm per side
Weight
550 g
Pocket depth
88 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Viltrox AF 16mm F1.8 FE (Sony E)’s measurements before cutting, and we leave a little more clearance.

430 mm290 mm
Layout computed for the Viltrox AF 16mm F1.8 FE (Sony E) alone in the M case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Viltrox AF 16mm F1.8 FE (Sony E)

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Viltrox AF 16mm F1.8 FE (Sony E) alone

    • Viltrox AF 16mm F1.8 FE (Sony E)

    M all-round case, €239

    Adapt this kit

  • With a body

    • Viltrox AF 16mm F1.8 FE (Sony E)
    • Sony A1

    M all-round case, €239

    Adapt this kit

  • Two lenses

    • Viltrox AF 16mm F1.8 FE (Sony E)
    • Sony A1
    • Samyang AF 24-70mm F2.8 FE (Sony E)

    M all-round case, €239

    Adapt this kit

How it is stored

The lens lies down, with front and rear caps on. The hood is stored reversed on the lens or in its own pocket.

Size and price

Often stored with the Viltrox AF 16mm F1.8 FE (Sony E)

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Viltrox AF 16mm F1.8 FE (Sony E) case

Which case size for the Viltrox AF 16mm F1.8 FE (Sony E)?
On its own, the Viltrox AF 16mm F1.8 FE (Sony E) fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 88 mm deep in 123 mm foam.
How much clearance does the foam leave around the Viltrox AF 16mm F1.8 FE (Sony E)?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Viltrox AF 16mm F1.8 FE (Sony E) fit as cabin baggage?
By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Viltrox AF 16mm F1.8 FE (Sony E) has accessories mounted?
The layout follows the Viltrox AF 16mm F1.8 FE (Sony E)’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Viltrox devices

Lenses from other brands