Skip to content

Delivery included worldwide.

Foamd
Build my case

Lenses

Custom case for Viltrox AF 35mm F1.8 EVO FE (Sony E)

On its own, the Viltrox AF 35mm F1.8 EVO FE (Sony E) fits in the S compact case, in a pocket cut to its dimensions. With a Sony A1 body, you need the M.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Viltrox AF 35mm F1.8 EVO FE (Sony E)

See kits with this device

Dimensions used
Ø 69 × 106 mm
Stored as
front and rear caps on, +30 mm of length (mount rear and caps, margin included); hood stored separately
Dimension reliability
Probable dimensions 66/100
Clearance left in the foam
3.5 mm per side
Weight
355 g
Pocket depth
71 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, published review

The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.

300 mm227 mm
Layout computed for the Viltrox AF 35mm F1.8 EVO FE (Sony E) alone in the S case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Viltrox AF 35mm F1.8 EVO FE (Sony E)

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Viltrox AF 35mm F1.8 EVO FE (Sony E) alone

    • Viltrox AF 35mm F1.8 EVO FE (Sony E)

    S compact case, €189

    Adapt this kit

  • With a body

    • Viltrox AF 35mm F1.8 EVO FE (Sony E)
    • Sony A1

    M all-round case, €239

    Adapt this kit

  • Two lenses

    • Viltrox AF 35mm F1.8 EVO FE (Sony E)
    • Sony A1
    • Samyang AF 24-70mm F2.8 FE (Sony E)

    M all-round case, €239

    Adapt this kit

How it is stored

The lens lies down, with front and rear caps on. The hood is stored reversed on the lens or in its own pocket.

Size and price

Often stored with the Viltrox AF 35mm F1.8 EVO FE (Sony E)

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Viltrox AF 35mm F1.8 EVO FE (Sony E) case

Which case size for the Viltrox AF 35mm F1.8 EVO FE (Sony E)?
On its own, the Viltrox AF 35mm F1.8 EVO FE (Sony E) fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 71 mm deep in 102 mm foam. With a Sony A1 body: that needs the M (€239).
How much clearance does the foam leave around the Viltrox AF 35mm F1.8 EVO FE (Sony E)?
3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
Does the case for the Viltrox AF 35mm F1.8 EVO FE (Sony E) fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Viltrox AF 35mm F1.8 EVO FE (Sony E) has accessories mounted?
The layout follows the Viltrox AF 35mm F1.8 EVO FE (Sony E)’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Viltrox devices

Lenses from other brands