Skip to content

Delivery included worldwide.

Foamd
Build my case

Camera bodies

Custom case for Fujifilm GFX100RF

On its own, the Fujifilm GFX100RF fits in the S compact case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Fujifilm GFX100RF

See kits with this device

Dimensions used
133.5 × 90.4 × 76.5 mm
Stored as
bare body: no lens, handle or cage
Dimension reliability
To confirm 56/100
Clearance left in the foam
4.5 mm per side
Weight
735 g
Pocket depth
79 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Fujifilm GFX100RF’s measurements before cutting, and we leave a little more clearance.

Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.

300 mm227 mm
Layout computed for the Fujifilm GFX100RF alone in the S case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Fujifilm GFX100RF

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Fujifilm GFX100RF alone

    • Fujifilm GFX100RF

    S compact case, €189

    Adapt this kit

  • Everyday

    • Fujifilm GFX100RF
    • SD card wallet
    • SSD Samsung T7

    S compact case, €189

    Adapt this kit

How it is stored

The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.

Size and price

Often stored with the Fujifilm GFX100RF

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Charger

    Empty pocket for your own, at no extra cost · 110 × 75 mm

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

Build the case and choose its storage

Questions about the Fujifilm GFX100RF case

Which case size for the Fujifilm GFX100RF?
On its own, the Fujifilm GFX100RF fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 79 mm deep in 102 mm foam.
How much clearance does the foam leave around the Fujifilm GFX100RF?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Fujifilm GFX100RF fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What about the Fujifilm GFX100RF’s batteries on a plane?
These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
What if my Fujifilm GFX100RF has accessories mounted?
The layout follows the Fujifilm GFX100RF’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Fujifilm devices

Camera bodies from other brands