Camera bodies
Fujifilm X-T4 hard case with custom foam
The short answer
The Fujifilm X-T4 measures 134.6 × 92.8 × 75.8 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Hard camera case: which one for your camera?
- Dimensions used
- 134.6 × 92.8 × 75.8 mm
- Stored as
- body cap on, +12 mm of depth (margin included). Published dimensions exclude the lens, additional grip and body cap: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 87 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Fujifilm X-T4’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Fujifilm X-T4
Take the set closest to yours, then adjust it in the configurator.
Key facts
- Fujifilm X-T4
- Pocket: Fujifilm NP-W235 battery
- SD card wallet
S compact case, €189
Everyday
- Fujifilm X-T4
- Fujifilm XF 16-55mm F2.8 R LM WR
- 2 × Pocket: Fujifilm NP-W235 battery
S compact case, €189
Full kit
- Fujifilm X-T4
- Fujifilm XF 16-55mm F2.8 R LM WR
- 3 × Pocket: Fujifilm NP-W235 battery
- Fujifilm XF 50-140mm F2.8 R LM OIS WR
- RØDE VideoMic NTG
- Dual charger
- Samsung T7
M all-round case, €259
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
The pocket cut for the Fujifilm X-T4
In the S case, the foam is cut at 85 × 144 mm on the floor for the Fujifilm X-T4: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 87 mm deep.
- Pocket footprint
- 85 × 144 mm
- Pocket depth
- 87 mm
- Foam under the pocket
- 15 mm
- Space left along the length
- 215 mm
- Space left across the width
- 83 mm
- Share of the inside volume used
- 11.8 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | fujifilm-dsc.com | 134.6 × 92.8 × 63.8 mm | — | the lens, additional grip and body cap |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Fujifilm X-T4: + larger, − smaller.
The Fujifilm GFX100RF measures 2.5 mm less in height than the Fujifilm X-T4. Same recommended case size for both: the S.
| Model | Width (mm) | Height (mm) | Depth (mm) | Recommended case |
|---|---|---|---|---|
| Fujifilm GFX100RF | −1 | −2.5 | +0.5 | S |
| Fujifilm X-T5 | −5 | −2 | 0 | S |
| Fujifilm X-S20 | −7 | −7.5 | +1.5 | S |
| Fujifilm X-T50 | −11 | −9 | −15 | S |
Often stored with the Fujifilm X-T4
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Fujifilm X-T4 case
- Which case size for the Fujifilm X-T4?
- On its own, the Fujifilm X-T4 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 87 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Fujifilm X-T4?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.