Camera bodies
Custom case for RED V-Raptor 8K VV
On its own, the RED V-Raptor 8K VV fits in the L shoot case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the RED V-Raptor 8K VV- Dimensions used
- 152 × 108 × 120 mm
- Stored as
- body cap on, +12 mm of depth (margin included)
- Dimension reliability
- To confirm 46/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 1,828 g
- Pocket depth
- 110 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your RED V-Raptor 8K VV’s measurements before cutting, and we leave a little more clearance.
Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.
Start from a kit with the RED V-Raptor 8K VV
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
RED V-Raptor 8K VV alone
- RED V-Raptor 8K VV
L shoot case, €329
Adapt this kitEveryday
- RED V-Raptor 8K VV
- SD card wallet
- SSD Samsung T7
L shoot case, €329
Adapt this kit
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
Often stored with the RED V-Raptor 8K VV
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the RED V-Raptor 8K VV case
- Which case size for the RED V-Raptor 8K VV?
- On its own, the RED V-Raptor 8K VV fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 110 mm deep in 175 mm foam.
- How much clearance does the foam leave around the RED V-Raptor 8K VV?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
- Does the case for the RED V-Raptor 8K VV fit as cabin baggage?
- The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
- What about the RED V-Raptor 8K VV’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my RED V-Raptor 8K VV has accessories mounted?
- The layout follows the RED V-Raptor 8K VV’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.