Camera bodies
Custom case for Nikon Z50 II
On its own, the Nikon Z50 II fits in the S compact case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the Nikon Z50 II- Dimensions used
- 127 × 96.8 × 78.5 mm
- Stored as
- body cap on, +12 mm of depth (margin included)
- Dimension reliability
- Probable dimensions 66/100
- Clearance left in the foam
- 3.5 mm per side
- Weight
- 550 g
- Pocket depth
- 81 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, published review
The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.
Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.
Start from a kit with the Nikon Z50 II
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
Nikon Z50 II alone
- Nikon Z50 II
S compact case, €189
Adapt this kitEveryday
- Nikon Z50 II
- SD card wallet
- SSD Samsung T7
S compact case, €189
Adapt this kit
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
Often stored with the Nikon Z50 II
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Nikon Z50 II case
- Which case size for the Nikon Z50 II?
- On its own, the Nikon Z50 II fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 81 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Nikon Z50 II?
- 3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
- Does the case for the Nikon Z50 II fit as cabin baggage?
- By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
- What about the Nikon Z50 II’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my Nikon Z50 II has accessories mounted?
- The layout follows the Nikon Z50 II’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.