Camera bodies
Ricoh GR IV Monochrome hard case with custom foam
The short answer
The Ricoh GR IV Monochrome measures 109.4 × 61.1 × 32.7 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Hard camera case: which one for your camera?
- Dimensions used
- 109.4 × 61.1 × 32.7 mm
- Stored as
- as is. Published dimensions exclude the controls and protruding parts: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 262 g
- Pocket depth
- 64 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Ricoh GR IV Monochrome’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Ricoh GR IV Monochrome
Take the set closest to yours, then adjust it in the configurator.
Everyday
- Ricoh GR IV Monochrome
- SD card wallet
- Samsung T7
- Pocket: smartphone
S compact case, €189
How it is stored
The lens is fixed and stays on the camera. Switch the camera off, remove external accessories and measure the complete camera with any protection you keep for transport.
Size and price
The pocket cut for the Ricoh GR IV Monochrome
In the S case, the foam is cut at 42 × 119 mm on the floor for the Ricoh GR IV Monochrome: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 64 mm deep.
- Pocket footprint
- 42 × 119 mm
- Pocket depth
- 64 mm
- Foam under the pocket
- 38 mm
- Space left along the length
- 258 mm
- Space left across the width
- 108 mm
- Share of the inside volume used
- 3.6 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | ricoh-imaging.co.jp | 109.4 × 61.1 × 32.7 mm | 262 g | the controls and protruding parts |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Ricoh GR IV Monochrome: + larger, − smaller.
The Ricoh GR IV has the same dimensions as the Ricoh GR IV Monochrome, to within 0.5 mm. Same recommended case size for both: the S.
| Model | Width (mm) | Height (mm) | Depth (mm) | Recommended case |
|---|---|---|---|---|
| Ricoh GR IV | 0 | 0 | 0 | S |
| Ricoh GR III | 0 | +1 | +0.5 | S |
| Ricoh GR IIIx | 0 | +1 | +2.5 | S |
| Canon PowerShot G7 X Mark III | −4 | 0 | +8.5 | S |
Often stored with the Ricoh GR IV Monochrome
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Ricoh GR IV Monochrome case
- Which case size for the Ricoh GR IV Monochrome?
- On its own, the Ricoh GR IV Monochrome fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 64 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Ricoh GR IV Monochrome?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.