Skip to content

Delivery included worldwide.

Foamd
Build my case

Camera bodies

Custom case for Z CAM E2-F6

On its own, the Z CAM E2-F6 fits in the M all-round case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Z CAM E2-F6

See kits with this device

Dimensions used
91.2 × 99.3 × 132.3 mm
Stored as
body cap on, +10 mm of depth (margin included)
Dimension reliability
To confirm 46/100
Clearance left in the foam
4.5 mm per side
Weight
1,090 g
Pocket depth
102 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Z CAM E2-F6’s measurements before cutting, and we leave a little more clearance.

Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.

430 mm290 mm
Layout computed for the Z CAM E2-F6 alone in the M case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Z CAM E2-F6

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Z CAM E2-F6 alone

    • Z CAM E2-F6

    M all-round case, €239

    Adapt this kit

  • Everyday

    • Z CAM E2-F6
    • SD card wallet
    • SSD Samsung T7

    M all-round case, €239

    Adapt this kit

How it is stored

The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.

Size and price

Often stored with the Z CAM E2-F6

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Charger

    Empty pocket for your own, at no extra cost · 110 × 75 mm

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

Build the case and choose its storage

Questions about the Z CAM E2-F6 case

Which case size for the Z CAM E2-F6?
On its own, the Z CAM E2-F6 fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 102 mm deep in 123 mm foam.
How much clearance does the foam leave around the Z CAM E2-F6?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Z CAM E2-F6 fit as cabin baggage?
By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
What about the Z CAM E2-F6’s batteries on a plane?
These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
What if my Z CAM E2-F6 has accessories mounted?
The layout follows the Z CAM E2-F6’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Z CAM devices

Camera bodies from other brands