Skip to content

Delivery included worldwide.

Foamd
Build my case

Lenses

Custom case for Panasonic Lumix S PRO 50mm F1.4

On its own, the Panasonic Lumix S PRO 50mm F1.4 fits in the M all-round case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Panasonic Lumix S PRO 50mm F1.4
Dimensions used
Ø 90 × 160 mm
Stored as
front and rear caps on, +30 mm of length (mount rear and caps, margin included); hood stored separately
Dimension reliability
To confirm 46/100
Clearance left in the foam
4.5 mm per side
Weight
955 g
Pocket depth
92 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Panasonic Lumix S PRO 50mm F1.4’s measurements before cutting, and we leave a little more clearance.

430 mm290 mm
Layout computed for the Panasonic Lumix S PRO 50mm F1.4 alone in the M case. You can add your gear and adjust the plan in the configurator.

How it is stored

The lens lies down, with front and rear caps on. The hood is stored reversed on the lens or in its own pocket.

Size and price

Often stored with the Panasonic Lumix S PRO 50mm F1.4

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Panasonic Lumix S PRO 50mm F1.4 case

Which case size for the Panasonic Lumix S PRO 50mm F1.4?
On its own, the Panasonic Lumix S PRO 50mm F1.4 fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 92 mm deep in 123 mm foam.
How much clearance does the foam leave around the Panasonic Lumix S PRO 50mm F1.4?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Panasonic Lumix S PRO 50mm F1.4 fit as cabin baggage?
By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Panasonic Lumix S PRO 50mm F1.4 has accessories mounted?
The layout follows the Panasonic Lumix S PRO 50mm F1.4’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Panasonic devices

Lenses from other brands