Skip to content

Delivery included worldwide.

Foamd
Build my case

Camera bodies

Custom case for Panasonic Lumix S1H

On its own, the Panasonic Lumix S1H fits in the L shoot case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Panasonic Lumix S1H

See kits with this device

Dimensions used
155 × 118.2 × 122.4 mm
Stored as
body cap on (+12 mm of depth) and protruding parts (+4 mm in width and height), margin included
Dimension reliability
To confirm 46/100
Clearance left in the foam
4.5 mm per side
Weight
1,052 g
Pocket depth
121 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, published review

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Panasonic Lumix S1H’s measurements before cutting, and we leave a little more clearance.

Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.

513 mm390 mm
Layout computed for the Panasonic Lumix S1H alone in the L case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Panasonic Lumix S1H

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Panasonic Lumix S1H alone

    • Panasonic Lumix S1H

    L shoot case, €329

    Adapt this kit

  • Everyday

    • Panasonic Lumix S1H
    • SD card wallet
    • SSD Samsung T7

    L shoot case, €329

    Adapt this kit

How it is stored

The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.

Size and price

Often stored with the Panasonic Lumix S1H

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Charger

    Empty pocket for your own, at no extra cost · 110 × 75 mm

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

Build the case and choose its storage

Questions about the Panasonic Lumix S1H case

Which case size for the Panasonic Lumix S1H?
On its own, the Panasonic Lumix S1H fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 121 mm deep in 175 mm foam.
How much clearance does the foam leave around the Panasonic Lumix S1H?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Panasonic Lumix S1H fit as cabin baggage?
The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
What about the Panasonic Lumix S1H’s batteries on a plane?
These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
What if my Panasonic Lumix S1H has accessories mounted?
The layout follows the Panasonic Lumix S1H’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Panasonic devices

Camera bodies from other brands