Camera bodies
Leica SL3-P hard case with custom foam
The short answer
The Leica SL3-P measures 151.5 × 108.1 × 96.6 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
With the card case, an SSD, a lens, a shotgun mic and a wireless mic, you need the M.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Hard camera case: which one for your camera?
- Dimensions used
- 151.5 × 108.1 × 96.6 mm
- Stored as
- body cap on, +12 mm of depth (margin included)
- Dimension reliability
- To confirm 46/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 768 g
- Pocket depth
- 87 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Leica SL3-P’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Leica SL3-P
Take the set closest to yours, then adjust it in the configurator.
Everyday
- Leica SL3-P
- SD card wallet
- Samsung T7
- Panasonic Lumix S PRO 24-70mm F2.8
- RØDE VideoMic NTG
- DJI Mic 2 (charging case)
M all-round case, €259
Full kit
- Leica SL3-P
- SD card wallet
- Samsung T7
- Panasonic Lumix S PRO 24-70mm F2.8
- RØDE VideoMic NTG
- DJI Mic 2 (charging case)
- Panasonic Lumix S PRO 70-200mm F4
- 82 mm ND filters (pouch)
- Pocket: small magic arm (3 to 5 in)
- Pocket: crab clamp
- 5-inch monitor
L shoot case, €379
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
The pocket cut for the Leica SL3-P
In the S case, the foam is cut at 118 × 161 mm on the floor for the Leica SL3-P: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 87 mm deep.
- Pocket footprint
- 118 × 161 mm
- Pocket depth
- 87 mm
- Foam under the pocket
- 15 mm
- Space left along the length
- 182 mm
- Space left across the width
- 66 mm
- Share of the inside volume used
- 18.4 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | leica-camera.com | 151.5 × 108.1 × 84.6 mm | 768 g | the body cap |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Leica SL3-P: + larger, − smaller.
The Leica SL3 measures 10.5 mm less in width than the Leica SL3-P. Same recommended case size for both: the S.
| Model | Width (mm) | Height (mm) | Depth (mm) | Weight (g) | Recommended case |
|---|---|---|---|---|---|
| Leica SL3 | −10.5 | 0 | 0 | +1 | S |
| Leica SL3-S | −10.5 | 0 | −2 | 0 | S |
| Leica Q3 | −21.5 | −28 | −4 | −25 | S |
| Leica M11 | −12.5 | −28 | −46 | −238 | S |
Often stored with the Leica SL3-P
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Leica SL3-P case
- Which case size for the Leica SL3-P?
- On its own, the Leica SL3-P fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 87 mm deep in 102 mm foam. With the card case, an SSD, a lens, a shotgun mic and a wireless mic: that needs the M (€259).
- How much clearance does the foam leave around the Leica SL3-P?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.