Skip to content

Delivery included worldwide.

Foamd
Build my case

Lenses

Custom case for Canon RF 800mm F11 IS STM

On its own, the Canon RF 800mm F11 IS STM fits in the L shoot case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €329, delivery included, in 5 to 6 weeks (4 to 5 with express, +€15). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Canon RF 800mm F11 IS STM

See kits with this device

Dimensions used
Ø 101.6 × 381.8 mm
Stored as
front and rear caps on, +30 mm of length (mount rear and caps, margin included); hood stored separately; store the lens RETRACTED (281.8 mm), not extended
Dimension reliability
To confirm 28/100
Clearance left in the foam
4.5 mm per side
Weight
1,260 g
Pocket depth
104 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
retailer, published review

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Canon RF 800mm F11 IS STM’s measurements before cutting, and we leave a little more clearance.

513 mm390 mm
Layout computed for the Canon RF 800mm F11 IS STM alone in the L case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Canon RF 800mm F11 IS STM

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Canon RF 800mm F11 IS STM alone

    • Canon RF 800mm F11 IS STM

    L shoot case, €329

    Adapt this kit

  • With a body

    • Canon RF 800mm F11 IS STM
    • Canon EOS R

    L shoot case, €329

    Adapt this kit

  • Two lenses

    • Canon RF 800mm F11 IS STM
    • Canon EOS R
    • Canon RF 24-105mm F2.8 L IS USM Z

    L shoot case, €329

    Adapt this kit

How it is stored

The lens lies down, with front and rear caps on. The hood is stored reversed on the lens or in its own pocket.

Size and price

Often stored with the Canon RF 800mm F11 IS STM

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Canon RF 800mm F11 IS STM case

Which case size for the Canon RF 800mm F11 IS STM?
On its own, the Canon RF 800mm F11 IS STM fits in the L case (513 × 390 × 229 mm inside), at €329 for case and foam, delivery included. Its pocket is 104 mm deep in 175 mm foam.
How much clearance does the foam leave around the Canon RF 800mm F11 IS STM?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Canon RF 800mm F11 IS STM fit as cabin baggage?
The L case measures 56 × 45.5 × 26.5 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
What if my Canon RF 800mm F11 IS STM has accessories mounted?
The layout follows the Canon RF 800mm F11 IS STM’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Canon devices

Lenses from other brands