Camera bodies
Custom case for DJI Ronin 4D
On its own, the DJI Ronin 4D fits in the XL wheels case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €449, delivery included, in 5 to 6 weeks (4 to 5 with express, +€25). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI Ronin 4D- Dimensions used
- 115 × 160 × 235 mm
- Stored as
- bare body: no lens, handle or cage
- Dimension reliability
- To confirm 56/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 1,450 g
- Pocket depth
- 162 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, published review
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI Ronin 4D’s measurements before cutting, and we leave a little more clearance.
Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.
Start from a kit with the DJI Ronin 4D
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
DJI Ronin 4D alone
- DJI Ronin 4D
XL wheels case, €449
Adapt this kitEveryday
- DJI Ronin 4D
- SD card wallet
- SSD Samsung T7
XL wheels case, €449
Adapt this kit
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
Often stored with the DJI Ronin 4D
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the DJI Ronin 4D case
- Which case size for the DJI Ronin 4D?
- On its own, the DJI Ronin 4D fits in the XL case (590 × 455 × 255 mm inside), at €449 for case and foam, delivery included. Its pocket is 162 mm deep in 210 mm foam.
- How much clearance does the foam leave around the DJI Ronin 4D?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
- Does the case for the DJI Ronin 4D fit as cabin baggage?
- The XL case measures 66.7 × 53.5 × 30.4 cm overall and is over the 55 × 40 × 23 cm cabin size. Ask your airline how to carry it; spare batteries stay in the cabin.
- What about the DJI Ronin 4D’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my DJI Ronin 4D has accessories mounted?
- The layout follows the DJI Ronin 4D’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.