Skip to content

Delivery included worldwide.

Foamd
Build my case

Lenses

Custom case for Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)

On its own, the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) fits in the S compact case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)
Dimensions used
Ø 74.6 × 149.3 mm
Stored as
front and rear caps on, +30 mm of length (mount rear and caps, margin included); hood stored separately
Dimension reliability
Probable dimensions 66/100
Clearance left in the foam
3.5 mm per side
Weight
525 g
Pocket depth
77 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, published review

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.

300 mm227 mm
Layout computed for the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) alone in the S case. You can add your gear and adjust the plan in the configurator.

How it is stored

The lens lies down, with front and rear caps on. The hood is stored reversed on the lens or in its own pocket.

Size and price

Often stored with the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Foamd lens cleaning kit

    Sold with its pocket, €15 · 170 × 95 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) case

Which case size for the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)?
On its own, the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 77 mm deep in 102 mm foam.
How much clearance does the foam leave around the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)?
3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
Does the case for the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C) has accessories mounted?
The layout follows the Tamron 17-70mm F/2.8 Di III-A VC RXD (Sony E, APS-C)’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Tamron devices

Lenses from other brands