Camera bodies
Sony ZV-1 hard case with custom foam
The short answer
The Sony ZV-1 measures 105.5 × 60 × 43.5 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Hard camera case: which one for your camera?
- Dimensions used
- 105.5 × 60 × 43.5 mm
- Stored as
- as is. Published dimensions exclude external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 62 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Sony ZV-1’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Sony ZV-1
Take the set closest to yours, then adjust it in the configurator.
How it is stored
The lens is fixed and stays on the camera. Switch the camera off, remove external accessories and measure the complete camera with any protection you keep for transport.
Size and price
The pocket cut for the Sony ZV-1
In the S case, the foam is cut at 53 × 115 mm on the floor for the Sony ZV-1: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 62 mm deep.
- Pocket footprint
- 53 × 115 mm
- Pocket depth
- 62 mm
- Foam under the pocket
- 40 mm
- Space left along the length
- 247 mm
- Space left across the width
- 112 mm
- Share of the inside volume used
- 4.2 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | sony.co.uk | 105.5 × 60 × 43.5 mm | — | external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Sony ZV-1: + larger, − smaller.
The Sony RX100 VII measures 4 mm less in width than the Sony ZV-1. Same recommended case size for both: the S.
| Model | Width (mm) | Height (mm) | Depth (mm) | Recommended case |
|---|---|---|---|---|
| Sony RX100 VII | −4 | −2 | −0.5 | S |
| Sony ZV-E10 | +9.5 | +4 | +13.5 | S |
| Sony ZV-E10 II | +9.5 | +7.5 | +22.5 | S |
| Sony ZV-E1 | +15.5 | +12 | +23 | S |
Often stored with the Sony ZV-1
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the Sony ZV-1 case
- Which case size for the Sony ZV-1?
- On its own, the Sony ZV-1 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 62 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Sony ZV-1?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.