Drones
Custom case for DJI Air 3S
On its own, the DJI Air 3S fits in the M all-round case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI Air 3S- Dimensions used
- 220.2 × 104.6 × 95.2 mm
- Stored as
- folded, propellers folded: +6 mm of length and height, +4 mm of width (DJI gives +3.2 mm of height with propellers on the Mavic 4 Pro)
- Dimension reliability
- Probable dimensions 66/100
- Clearance left in the foam
- 3.5 mm per side
- Weight
- 724 g
- Pocket depth
- 98 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, published review
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.
Start from a kit with the DJI Air 3S
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
DJI Air 3S alone
- DJI Air 3S
M all-round case, €239
Adapt this kitWith its remote controller
- DJI Air 3S
- DJI RC 2
M all-round case, €239
Adapt this kit
How it is stored
The drone is held folded, propellers folded and gimbal guard on; the battery stays in the aircraft.
Size and price
Often stored with the DJI Air 3S
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI Air 3S case
- Which case size for the DJI Air 3S?
- On its own, the DJI Air 3S fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 98 mm deep in 123 mm foam.
- How much clearance does the foam leave around the DJI Air 3S?
- 3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
- Does the case for the DJI Air 3S fit as cabin baggage?
- By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
- What about the DJI Air 3S’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my DJI Air 3S has accessories mounted?
- The layout follows the DJI Air 3S’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.