Skip to content

Delivery included worldwide.

Foamd
Build my case

Focus

Custom case for DJI Focus Pro Motor

On its own, the DJI Focus Pro Motor fits in the S compact case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the DJI Focus Pro Motor
  • Cutting plan approved by you before production
  • Delivery included, with tracking number
  • Two-year legal guarantee of conformity
  • Secure payment by Shopify

See kits with this device

Dimensions used
100 × 61 × 34 mm
Stored as
as is
Dimension reliability
Probable dimensions 66/100
Clearance left in the foam
3.5 mm per side
Weight
123 g
Pocket depth
36 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.

300 mm227 mm
Layout computed for the DJI Focus Pro Motor alone in the S case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the DJI Focus Pro Motor

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • DJI Focus Pro Motor alone

    • DJI Focus Pro Motor

    S compact case, €189

    Adapt this kit
    300 mm227 mm

  • With its hand control

    • DJI Focus Pro Motor
    • DJI Focus Pro Hand Unit

    S compact case, €189

    Adapt this kit
    300 mm227 mm

  • Focus kit

    • DJI Focus Pro Motor
    • DJI Focus Pro Grip
    • DJI Focus Pro Hand Unit
    • DJI Focus Pro LiDAR Range Sensor
    • 2 × Pocket: 15 mm rod, 20 cm

    M all-round case, €259

    Adapt this kit
    430 mm290 mm

How it is stored

Each part (motor, rangefinder, grip, hand unit) has its own pocket, cables unplugged: nothing strains the shafts or connectors.

Size and price

Often stored with the DJI Focus Pro Motor

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Cables and adapters

    Empty pocket for your own, at no extra cost · 130 × 90 mm

Build the case and choose its storage

Questions about the DJI Focus Pro Motor case

Which case size for the DJI Focus Pro Motor?
On its own, the DJI Focus Pro Motor fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 36 mm deep in 102 mm foam.
How much clearance does the foam leave around the DJI Focus Pro Motor?
3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
Does the case for the DJI Focus Pro Motor fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my DJI Focus Pro Motor has accessories mounted?
The layout follows the DJI Focus Pro Motor’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other DJI devices

Focus from other brands