Wireless video
DJI SDR Transmission 2 hard case with custom foam
The short answer
The DJI SDR Transmission 2 measures 76 × 61 × 25 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 76 × 61 × 25 mm
- Stored as
- as is. Published dimensions exclude the fixed antennas and cold shoe adapter: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 136 g
- Pocket depth
- 63 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI SDR Transmission 2’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the DJI SDR Transmission 2
Take the set closest to yours, then adjust it in the configurator.
Everyday
- 2 × DJI SDR Transmission 2
- 2 × Pocket: NP-F970 battery
- Pocket: small magic arm (3 to 5 in)
S compact case, €189
Full kit
- 2 × DJI SDR Transmission 2
- 3 × Pocket: NP-F970 battery
- 2 × Pocket: small magic arm (3 to 5 in)
- Portkeys LH5P II
- Pocket: NP-F dual charger
- Pocket: crab clamp
- 5-inch monitor
M all-round case, €259
How it is stored
The SDR Transmission 2 antennas are fixed: do not unscrew them. Published dimensions exclude them. Measure the complete unit in its storage position before confirming the compartment.
Size and price
The pocket cut for the DJI SDR Transmission 2
In the S case, the foam is cut at 34 × 85 mm on the floor for the DJI SDR Transmission 2: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 63 mm deep.
- Pocket footprint
- 34 × 85 mm
- Pocket depth
- 63 mm
- Foam under the pocket
- 39 mm
- Space left along the length
- 266 mm
- Space left across the width
- 142 mm
- Share of the inside volume used
- 2 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | dji.com | 76 × 61 × 25 mm | 136 g | the fixed antennas and cold shoe adapter |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the DJI SDR Transmission 2: + larger, − smaller.
The DJI SDR Transmission (receiver) measures 10.5 mm more in length than the DJI SDR Transmission 2. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Weight (g) | Recommended case |
|---|---|---|---|---|---|
| DJI SDR Transmission (receiver) | +10.5 | +3 | +7 | +9 | S |
| DJI SDR Transmission (transmitter) | +10.5 | +3 | +7 | +9 | S |
| Teradek Bolt 6 LT 750 (transmitter) | +27 | −1 | +8 | +70 | S |
| Accsoon CineView HE (receiver) | +29 | +5 | +7 | +64 | S |
Often stored with the DJI SDR Transmission 2
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI SDR Transmission 2 case
- Which case size for the DJI SDR Transmission 2?
- On its own, the DJI SDR Transmission 2 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 63 mm deep in 102 mm foam.
- How much clearance does the foam leave around the DJI SDR Transmission 2?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.