Compact cameras
GoPro MISSION 1 PRO hard case with custom foam
The short answer
The GoPro MISSION 1 PRO measures 80.1 × 52.1 × 44.3 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 80.1 × 52.1 × 44.3 mm
- Stored as
- as is. Published dimensions exclude the lens hood: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 207 g
- Pocket depth
- 47 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your GoPro MISSION 1 PRO’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the GoPro MISSION 1 PRO
Take the set closest to yours, then adjust it in the configurator.
Full kit
- GoPro MISSION 1 PRO
- SD card wallet
- Pocket: crab clamp
- Pocket: small magic arm (3 to 5 in)
S compact case, €189
How it is stored
The dimensions include the fixed lens and buttons, but not the lens hood. Store the hood and mounts separately, or measure the complete assembly if you leave them attached.
Size and price
The pocket cut for the GoPro MISSION 1 PRO
In the S case, the foam is cut at 62 × 90 mm on the floor for the GoPro MISSION 1 PRO: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 47 mm deep.
- Pocket footprint
- 62 × 90 mm
- Pocket depth
- 47 mm
- Foam under the pocket
- 55 mm
- Space left along the length
- 238 mm
- Space left across the width
- 137 mm
- Share of the inside volume used
- 2.9 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | gopro.com | 80.1 × 52.1 × 44.3 mm | 207 g | the lens hood |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the GoPro MISSION 1 PRO: + larger, − smaller.
The GoPro MISSION 1 has the same dimensions as the GoPro MISSION 1 PRO, to within 0.5 mm. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Weight (g) | Recommended case |
|---|---|---|---|---|---|
| GoPro MISSION 1 | 0 | 0 | 0 | 0 | S |
| GoPro HERO11 Black | −8.5 | −1.5 | −10.5 | — | S |
| GoPro HERO12 Black | −8.5 | −1.5 | −10.5 | — | S |
| GoPro HERO13 Black | −9 | +3 | −10.5 | −50 | S |
Often stored with the GoPro MISSION 1 PRO
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Questions about the GoPro MISSION 1 PRO case
- Which case size for the GoPro MISSION 1 PRO?
- On its own, the GoPro MISSION 1 PRO fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 47 mm deep in 102 mm foam.
- How much clearance does the foam leave around the GoPro MISSION 1 PRO?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.