Compact cameras
Insta360 GO 3S hard case with custom foam
The short answer
The Insta360 GO 3S measures 54.4 × 25.6 × 24.8 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 54.4 × 25.6 × 24.8 mm
- Stored as
- as is. Published dimensions exclude the Action Pod and mounts: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 27 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Insta360 GO 3S’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Camera only, separated from the Action Pod. The kit provides two separate pockets; do not use the camera dimensions for the assembled unit.
Size and price
The pocket cut for the Insta360 GO 3S
In the S case, the foam is cut at 35 × 64 mm on the floor for the Insta360 GO 3S: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 27 mm deep.
- Pocket footprint
- 35 × 64 mm
- Pocket depth
- 27 mm
- Foam under the pocket
- 75 mm
- Space left along the length
- 265 mm
- Space left across the width
- 163 mm
- Share of the inside volume used
- 0.7 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | onlinemanual.insta360.com | 54.4 × 25.6 × 24.8 mm | — | the Action Pod and mounts |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Insta360 GO 3S: + larger, − smaller.
The Insta360 GO Ultra Camera measures 20 mm more in width than the Insta360 GO 3S. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| Insta360 GO Ultra Camera | −8.5 | +20 | −2.5 | S |
| Insta360 GO Ultra Action Pod | +16 | +23 | +8.5 | S |
| Insta360 Ace Pro 2 | +17.5 | +26.5 | +13 | S |
| Insta360 X6 | +45.5 | +24.5 | +15 | S |
Often stored with the Insta360 GO 3S
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Questions about the Insta360 GO 3S case
- Which case size for the Insta360 GO 3S?
- On its own, the Insta360 GO 3S fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 27 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Insta360 GO 3S?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.