Compact cameras
Insta360 X3 hard case with custom foam
The short answer
The Insta360 X3 measures 114 × 46 × 33.1 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 114 × 46 × 33.1 mm
- Stored as
- as is. Published dimensions exclude external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 36 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Insta360 X3’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Camera only, without a housing or external mounts. Measure the whole unit if you keep a lens protector attached.
Size and price
The pocket cut for the Insta360 X3
In the S case, the foam is cut at 55 × 123 mm on the floor for the Insta360 X3: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 36 mm deep.
- Pocket footprint
- 55 × 123 mm
- Pocket depth
- 36 mm
- Foam under the pocket
- 66 mm
- Space left along the length
- 245 mm
- Space left across the width
- 104 mm
- Share of the inside volume used
- 2.7 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | store.insta360.com | 114 × 46 × 33.1 mm | — | external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Insta360 X3: + larger, − smaller.
The Insta360 X4 measures 9.5 mm more in length than the Insta360 X3. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| Insta360 X4 | +9.5 | 0 | +4.5 | S |
| Insta360 X5 | +10.5 | 0 | +5 | S |
| Insta360 X6 | −14 | +4 | +7 | S |
| Insta360 Luna Pro | +41.5 | +7 | +5.5 | S |
Often stored with the Insta360 X3
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Questions about the Insta360 X3 case
- Which case size for the Insta360 X3?
- On its own, the Insta360 X3 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 36 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Insta360 X3?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.