Skip to content

Delivery included worldwide.

Foamd
Build my case

Audio

Custom case for Sound Devices MixPre-6 II

On its own, the Sound Devices MixPre-6 II fits in the S compact case, in a pocket cut to its dimensions. With a shotgun mic, you need the M.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Sound Devices MixPre-6 II
  • Cutting plan approved by you before production
  • Delivery included, with tracking number
  • Two-year legal guarantee of conformity
  • Secure payment by Shopify

See kits with this device

Dimensions used
166 × 118 × 36 mm
Stored as
as is
Dimension reliability
To confirm 48/100
Clearance left in the foam
4.5 mm per side
Weight
560 g
Pocket depth
38 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
retailer

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Sound Devices MixPre-6 II’s measurements before cutting, and we leave a little more clearance.

300 mm227 mm
Layout computed for the Sound Devices MixPre-6 II alone in the S case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Sound Devices MixPre-6 II

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Sound Devices MixPre-6 II alone

    • Sound Devices MixPre-6 II

    S compact case, €189

    Adapt this kit

  • With a shotgun mic

    • Sound Devices MixPre-6 II
    • RØDE VideoMic NTG

    M all-round case, €259

    Adapt this kit

How it is stored

The charging case or recorder lies flat; cables go in a pouch or a dedicated pocket.

Size and price

Often stored with the Sound Devices MixPre-6 II

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Spare batteries

    Empty pocket for your own, at no extra cost · 90 × 60 mm

  • Cables and adapters

    Empty pocket for your own, at no extra cost · 130 × 90 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Sound Devices MixPre-6 II case

Which case size for the Sound Devices MixPre-6 II?
On its own, the Sound Devices MixPre-6 II fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 38 mm deep in 102 mm foam. With a shotgun mic: that needs the M (€259).
How much clearance does the foam leave around the Sound Devices MixPre-6 II?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Sound Devices MixPre-6 II fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Sound Devices MixPre-6 II has accessories mounted?
The layout follows the Sound Devices MixPre-6 II’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Sound Devices devices

Audio from other brands