Wireless video
Starlink Mini hard case with custom foam
The short answer
The Starlink Mini measures 298.5 × 259 × 38.5 mm. On its own it fits the L shoot case: €379, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 298.5 × 259 × 38.5 mm
- Stored as
- as is. Published dimensions exclude cables, power supply and additional mounts: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 41 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Starlink Mini’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Antenna only, with integrated router. Store cables and power supply separately. Measure the stand in its intended transport position.
Size and price
The pocket cut for the Starlink Mini
In the L case, the foam is cut at 268 × 308 mm on the floor for the Starlink Mini: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 41 mm deep.
- Pocket footprint
- 268 × 308 mm
- Pocket depth
- 41 mm
- Foam under the pocket
- 134 mm
- Space left along the length
- 245 mm
- Space left across the width
- 82 mm
- Share of the inside volume used
- 7.4 %
Margins: inside of the L case (513 × 390 × 229 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | starlink.com | 298.5 × 259 × 38.5 mm | — | cables, power supply and additional mounts |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Starlink Mini: + larger, − smaller.
The Teradek Bolt 6 LT 750 (receiver) measures 176.5 mm less in length than the Starlink Mini. Recommended case size: the S for the Teradek Bolt 6 LT 750 (receiver), the L for the Starlink Mini.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| Teradek Bolt 6 LT 750 (receiver) | −176.5 | −165 | −11.5 | S |
| Hollyland Pyro S (receiver) | −186.5 | −188 | −4.5 | S |
| Hollyland Pyro S (transmitter) | −186.5 | −188 | −4.5 | S |
| Hollyland Pyro H (receiver) | −189.5 | −196.5 | −5 | S |
Often stored with the Starlink Mini
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the Starlink Mini case
- Which case size for the Starlink Mini?
- On its own, the Starlink Mini fits in the L case (513 × 390 × 229 mm inside), at €379 for case and foam, delivery included. Its pocket is 41 mm deep in 175 mm foam.
- How much clearance does the foam leave around the Starlink Mini?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.