Audio
Akai MPC Live II hard case with custom foam
The short answer
The Akai MPC Live II measures 411.5 × 243.8 × 45.7 mm. On its own it fits the L shoot case: €379, case and cut foam included, delivery included, in 4 to 6 weeks.
With the card case, you need the XL.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
- Dimensions used
- 411.5 × 243.8 × 45.7 mm
- Stored as
- as is. Published dimensions exclude external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 48 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Akai MPC Live II’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Akai MPC Live II
Take the set closest to yours, then adjust it in the configurator.
How it is stored
Device unplugged, without a sleeve or protective cover. Check the height of the controls and allow separate pockets for cables and power supply.
Size and price
The pocket cut for the Akai MPC Live II
In the L case, the foam is cut at 421 × 253 mm on the floor for the Akai MPC Live II: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 48 mm deep.
- Pocket footprint
- 421 × 253 mm
- Pocket depth
- 48 mm
- Foam under the pocket
- 127 mm
- Space left along the length
- 92 mm
- Space left across the width
- 137 mm
- Share of the inside volume used
- 11.2 %
Margins: inside of the L case (513 × 390 × 229 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | cdn.algam.net | 411.5 × 243.8 × 45.7 mm | — | external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Akai MPC Live II: + larger, − smaller.
The Pioneer DJ DDJ-400 measures 70.5 mm more in length than the Akai MPC Live II. Recommended case size: the XL for the Pioneer DJ DDJ-400, the L for the Akai MPC Live II.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| Pioneer DJ DDJ-400 | +70.5 | +28.5 | +13.5 | XL |
| Pioneer DJ DDJ-FLX4 | +70.5 | +29 | +13.5 | XL |
| RØDECaster Pro II | −106.5 | +26 | +14.5 | L |
| Roland SP-404MKII | −135.5 | −66.5 | +25 | M |
Often stored with the Akai MPC Live II
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Foamd cable pouch
Sold with its pocket, €14 · 200 × 120 mm
Questions about the Akai MPC Live II case
- Which case size for the Akai MPC Live II?
- On its own, the Akai MPC Live II fits in the L case (513 × 390 × 229 mm inside), at €379 for case and foam, delivery included. Its pocket is 48 mm deep in 175 mm foam. With the card case: that needs the XL (€529).
- How much clearance does the foam leave around the Akai MPC Live II?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.