Audio
Roland SP-404MKII hard case with custom foam
The short answer
The Roland SP-404MKII measures 275.8 × 177.5 × 70.5 mm. On its own it fits the M all-round case: €259, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
- Dimensions used
- 275.8 × 177.5 × 70.5 mm
- Stored as
- as is. Published dimensions exclude external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 73 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Roland SP-404MKII’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Device unplugged, without a sleeve or protective cover. Check the height of the controls and allow separate pockets for cables and power supply.
Size and price
The pocket cut for the Roland SP-404MKII
In the M case, the foam is cut at 285 × 187 mm on the floor for the Roland SP-404MKII: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 73 mm deep.
- Pocket footprint
- 285 × 187 mm
- Pocket depth
- 73 mm
- Foam under the pocket
- 50 mm
- Space left along the length
- 145 mm
- Space left across the width
- 103 mm
- Share of the inside volume used
- 17.7 %
Margins: inside of the M case (430 × 290 × 176 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | roland.com | 275.8 × 177.5 × 70.5 mm | — | external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Roland SP-404MKII: + larger, − smaller.
The RØDECaster Duo measures 47.5 mm more in width than the Roland SP-404MKII. Same recommended case size for both: the M.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| RØDECaster Duo | −41 | +47.5 | +5.5 | M |
| Teenage Engineering OP-XY | +24 | −57.5 | −50.5 | M |
| Teenage Engineering OP-1 | +6 | −75.5 | −43.5 | M |
| RØDECaster Pro II | +29 | +92.5 | −10.5 | L |
Often stored with the Roland SP-404MKII
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Foamd cable pouch
Sold with its pocket, €14 · 200 × 120 mm
Questions about the Roland SP-404MKII case
- Which case size for the Roland SP-404MKII?
- On its own, the Roland SP-404MKII fits in the M case (430 × 290 × 176 mm inside), at €259 for case and foam, delivery included. Its pocket is 73 mm deep in 123 mm foam.
- How much clearance does the foam leave around the Roland SP-404MKII?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.