Audio
Teenage Engineering OP-1 hard case with custom foam
The short answer
The Teenage Engineering OP-1 measures 282 × 102 × 27 mm. On its own it fits the M all-round case: €259, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
- Dimensions used
- 282 × 102 × 27 mm
- Stored as
- estimated height including controls: 27 mm, to confirm. Published dimensions exclude the full control height, which needs confirmation: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 104 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Teenage Engineering OP-1’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Original OP-1, different from the OP-1 Field. Confirm the height including controls on your device before cutting.
Size and price
The pocket cut for the Teenage Engineering OP-1
In the M case, the foam is cut at 291 × 36 mm on the floor for the Teenage Engineering OP-1: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 104 mm deep.
- Pocket footprint
- 291 × 36 mm
- Pocket depth
- 104 mm
- Foam under the pocket
- 19 mm
- Space left along the length
- 139 mm
- Space left across the width
- 254 mm
- Share of the inside volume used
- 5 %
Margins: inside of the M case (430 × 290 × 176 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | teenage.engineering | 282 × 102 × 13.5 mm | — | the full control height, which needs confirmation |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Teenage Engineering OP-1: + larger, − smaller.
The Teenage Engineering OP-XY measures 18 mm more in length than the Teenage Engineering OP-1. Same recommended case size for both: the M.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| Teenage Engineering OP-XY | +18 | +18 | −7 | M |
| Roland SP-404MKII | −6 | +75.5 | +43.5 | M |
| Tascam Portacapture X6 | −107.5 | −27 | +10 | S |
| Sound Devices MixPre-6 II | −116 | +16 | +9 | S |
Often stored with the Teenage Engineering OP-1
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Foamd cable pouch
Sold with its pocket, €14 · 200 × 120 mm
Questions about the Teenage Engineering OP-1 case
- Which case size for the Teenage Engineering OP-1?
- On its own, the Teenage Engineering OP-1 fits in the M case (430 × 290 × 176 mm inside), at €259 for case and foam, delivery included. Its pocket is 104 mm deep in 123 mm foam.
- How much clearance does the foam leave around the Teenage Engineering OP-1?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.