Skip to content

Delivery included worldwide.

Foamd
Build my case

Switchers & live

Custom case for Blackmagic ATEM Mini Extreme

On its own, the Blackmagic ATEM Mini Extreme fits in the M all-round case, in a pocket cut to its dimensions.

You receive the case and its cut foam; the gear is not included. From €239, delivery included, in 5 to 6 weeks (4 to 5 with express, +€12). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Blackmagic ATEM Mini Extreme
  • Cutting plan approved by you before production
  • Delivery included, with tracking number
  • Two-year legal guarantee of conformity
  • Secure payment by Shopify

Compare sizes for switchers and Mac minis

See kits with this device

Dimensions used
369.8 × 136.4 × 39.6 mm
Stored as
as is
Dimension reliability
Probable dimensions 66/100
Clearance left in the foam
3.5 mm per side
Weight
1,234 g
Pocket depth
42 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet, retailer

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.

430 mm290 mm
Layout computed for the Blackmagic ATEM Mini Extreme alone in the M case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Blackmagic ATEM Mini Extreme

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Blackmagic ATEM Mini Extreme alone

    • Blackmagic ATEM Mini Extreme

    M all-round case, €239

    Adapt this kit

  • With an SSD

    • Blackmagic ATEM Mini Extreme
    • Samsung T7

    M all-round case, €239

    Adapt this kit

  • Live production kit

    • Blackmagic ATEM Mini Extreme
    • Apple Mac mini (2024)
    • Samsung T7

    L shoot case, €329

    Adapt this kit

How it is stored

The switcher lies flat, buttons up, with the power supply and cables stored separately: the rear connectors do not press against the foam.

Size and price

Often stored with the Blackmagic ATEM Mini Extreme

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Cables and adapters

    Empty pocket for your own, at no extra cost · 130 × 90 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Blackmagic ATEM Mini Extreme case

Which case size for the Blackmagic ATEM Mini Extreme?
On its own, the Blackmagic ATEM Mini Extreme fits in the M case (430 × 290 × 176 mm inside), at €239 for case and foam, delivery included. Its pocket is 42 mm deep in 123 mm foam.
How much clearance does the foam leave around the Blackmagic ATEM Mini Extreme?
3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
Does the case for the Blackmagic ATEM Mini Extreme fit as cabin baggage?
By dimensions: the M case measures 46.2 × 35.5 × 19.2 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, but not the 55 × 35 × 25 cm size, another reference size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Blackmagic ATEM Mini Extreme has accessories mounted?
The layout follows the Blackmagic ATEM Mini Extreme’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Blackmagic Design devices

Switchers & live from other brands