Skip to content

Delivery included worldwide.

Foamd
Build my case

Switchers & live

Custom case for Blackmagic ATEM SDI

On its own, the Blackmagic ATEM SDI fits in the S compact case, in a pocket cut to its dimensions. With a recording SSD, you need the M.

You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.

Build my case with just the Blackmagic ATEM SDI
  • Cutting plan approved by you before production
  • Delivery included, with tracking number
  • Two-year legal guarantee of conformity
  • Secure payment by Shopify

Compare sizes for switchers and Mac minis

See kits with this device

Dimensions used
237.5 × 118.6 × 35.1 mm
Stored as
as is
Dimension reliability
To confirm 46/100
Clearance left in the foam
4.5 mm per side
Weight
678 g
Pocket depth
38 mm
Delivered cases
no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
Sources
manufacturer spec sheet

The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.

Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Blackmagic ATEM SDI’s measurements before cutting, and we leave a little more clearance.

300 mm227 mm
Layout computed for the Blackmagic ATEM SDI alone in the S case. You can add your gear and adjust the plan in the configurator.

Start from a kit with the Blackmagic ATEM SDI

Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.

  • Blackmagic ATEM SDI alone

    • Blackmagic ATEM SDI

    S compact case, €189

    Adapt this kit

  • With an SSD

    • Blackmagic ATEM SDI
    • Samsung T7

    M all-round case, €259

    Adapt this kit

  • Live production kit

    • Blackmagic ATEM SDI
    • Apple Mac mini (2024)
    • Samsung T7

    L shoot case, €379

    Adapt this kit

How it is stored

The switcher lies flat, buttons up, with the power supply and cables stored separately: the rear connectors do not press against the foam.

Size and price

Often stored with the Blackmagic ATEM SDI

Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.

  • Cables and adapters

    Empty pocket for your own, at no extra cost · 130 × 90 mm

  • Foamd SD card wallet

    Sold with its pocket, €12 · 115 × 85 mm

  • Foamd cable pouch

    Sold with its pocket, €14 · 200 × 120 mm

Build the case and choose its storage

Questions about the Blackmagic ATEM SDI case

Which case size for the Blackmagic ATEM SDI?
On its own, the Blackmagic ATEM SDI fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 38 mm deep in 102 mm foam. With a recording SSD: that needs the M (€259).
How much clearance does the foam leave around the Blackmagic ATEM SDI?
4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
Does the case for the Blackmagic ATEM SDI fit as cabin baggage?
By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
What if my Blackmagic ATEM SDI has accessories mounted?
The layout follows the Blackmagic ATEM SDI’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.

Other Blackmagic Design devices

Switchers & live from other brands