Switchers & live
Custom case for Blackmagic ATEM SDI Pro ISO
On its own, the Blackmagic ATEM SDI Pro ISO fits in the S compact case, in a pocket cut to its dimensions. With a recording SSD, you need the M.
You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the Blackmagic ATEM SDI Pro ISO- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Compare sizes for switchers and Mac minis
- Dimensions used
- 237.5 × 118.6 × 35.1 mm
- Stored as
- as is
- Dimension reliability
- To confirm 46/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 678 g
- Pocket depth
- 38 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Blackmagic ATEM SDI Pro ISO’s measurements before cutting, and we leave a little more clearance.
Start from a kit with the Blackmagic ATEM SDI Pro ISO
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
Blackmagic ATEM SDI Pro ISO alone
- Blackmagic ATEM SDI Pro ISO
S compact case, €189
Adapt this kitWith an SSD
- Blackmagic ATEM SDI Pro ISO
- Samsung T7
M all-round case, €259
Adapt this kitLive production kit
- Blackmagic ATEM SDI Pro ISO
- Apple Mac mini (2024)
- Samsung T7
L shoot case, €379
Adapt this kit
How it is stored
The switcher lies flat, buttons up, with the power supply and cables stored separately: the rear connectors do not press against the foam.
Size and price
Often stored with the Blackmagic ATEM SDI Pro ISO
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Foamd cable pouch
Sold with its pocket, €14 · 200 × 120 mm
Questions about the Blackmagic ATEM SDI Pro ISO case
- Which case size for the Blackmagic ATEM SDI Pro ISO?
- On its own, the Blackmagic ATEM SDI Pro ISO fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 38 mm deep in 102 mm foam. With a recording SSD: that needs the M (€259).
- How much clearance does the foam leave around the Blackmagic ATEM SDI Pro ISO?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
- Does the case for the Blackmagic ATEM SDI Pro ISO fit as cabin baggage?
- By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
- What if my Blackmagic ATEM SDI Pro ISO has accessories mounted?
- The layout follows the Blackmagic ATEM SDI Pro ISO’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.
Other Blackmagic Design devices
- Blackmagic Cinema Camera 6K
- Blackmagic Micro Studio Camera 4K G2
- Blackmagic Pocket Cinema Camera 4K
- Blackmagic Pocket Cinema Camera 6K
- Blackmagic Pocket Cinema Camera 6K G2
- Blackmagic Pocket Cinema Camera 6K Pro
- Blackmagic PYXIS 12K
- Blackmagic PYXIS 6K