Camera bodies
Custom case for DJI Osmo Pocket 3
On its own, the DJI Osmo Pocket 3 fits in the S compact case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI Osmo Pocket 3- Dimensions used
- 42.2 × 33.5 × 139.7 mm
- Stored as
- bare body: no lens, handle or cage
- Dimension reliability
- To confirm 56/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 179 g
- Pocket depth
- 36 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI Osmo Pocket 3’s measurements before cutting, and we leave a little more clearance.
Keeping a cage, a handle or a lens mounted? Add it as a custom item in the configurator, with the dimensions of the whole assembly: the pocket is then cut for the body exactly as you store it.
Start from a kit with the DJI Osmo Pocket 3
Pick the set closest to yours, then add or remove what you like in the configurator. Size and price are computed by our engine for this exact gear.
DJI Osmo Pocket 3 alone
- DJI Osmo Pocket 3
S compact case, €189
Adapt this kitEveryday
- DJI Osmo Pocket 3
- SD card wallet
- SSD Samsung T7
S compact case, €189
Adapt this kit
How it is stored
The body is stored upright, on its base, with the cap on: the screen and mount do not rest on the foam. If the case’s foam is too thin for its height, it lies on its back, mount facing up.
Size and price
Often stored with the DJI Osmo Pocket 3
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Foamd lens cleaning kit
Sold with its pocket, €15 · 170 × 95 mm
Questions about the DJI Osmo Pocket 3 case
- Which case size for the DJI Osmo Pocket 3?
- On its own, the DJI Osmo Pocket 3 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 36 mm deep in 102 mm foam.
- How much clearance does the foam leave around the DJI Osmo Pocket 3?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.
- Does the case for the DJI Osmo Pocket 3 fit as cabin baggage?
- By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
- What about the DJI Osmo Pocket 3’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my DJI Osmo Pocket 3 has accessories mounted?
- The layout follows the DJI Osmo Pocket 3’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.