Compact cameras
DJI Osmo Pocket 4P hard case with custom foam
The short answer
The DJI Osmo Pocket 4P measures 159.5 × 63.3 × 33.5 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 159.5 × 63.3 × 33.5 mm
- Stored as
- as is. Published dimensions exclude the protective cover and handle: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 230 g
- Pocket depth
- 36 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI Osmo Pocket 4P’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the DJI Osmo Pocket 4P
Take the set closest to yours, then adjust it in the configurator.
Full kit
- DJI Osmo Pocket 4P
- SD card wallet
- Pocket: crab clamp
- Pocket: small magic arm (3 to 5 in)
- Samsung T7
- DJI Mic Mini (charging case)
- Pocket: smartphone
M all-round case, €259
How it is stored
The dimensions describe the camera alone. Switch it off before storing it. If you keep a protective cover or handle attached, measure the complete assembly: do not put pressure on the gimbal axes.
Size and price
The pocket cut for the DJI Osmo Pocket 4P
In the S case, the foam is cut at 73 × 169 mm on the floor for the DJI Osmo Pocket 4P: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 36 mm deep.
- Pocket footprint
- 73 × 169 mm
- Pocket depth
- 36 mm
- Foam under the pocket
- 66 mm
- Space left along the length
- 227 mm
- Space left across the width
- 58 mm
- Share of the inside volume used
- 4.9 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | dji.com | 159.5 × 63.3 × 33.5 mm | 230 g | the protective cover and handle |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the DJI Osmo Pocket 4P: + larger, − smaller.
The DJI Osmo Pocket 4 measures 19 mm less in width than the DJI Osmo Pocket 4P. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Weight (g) | Recommended case |
|---|---|---|---|---|---|
| DJI Osmo Pocket 4 | −15.5 | −19 | 0 | −39 | S |
| DJI Osmo Pocket 3 | −20 | −21 | 0 | −51 | S |
| DJI Pocket 2 | −35 | −25 | −3.5 | — | S |
| DJI Osmo 360 | −78.5 | −2.5 | +3 | −47 | S |
Often stored with the DJI Osmo Pocket 4P
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Questions about the DJI Osmo Pocket 4P case
- Which case size for the DJI Osmo Pocket 4P?
- On its own, the DJI Osmo Pocket 4P fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 36 mm deep in 102 mm foam.
- How much clearance does the foam leave around the DJI Osmo Pocket 4P?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.