Gimbals
DJI RS 3 Pro hard case with custom foam
The short answer
The DJI RS 3 Pro measures 276 × 268 × 68 mm. On its own it fits the L shoot case: €379, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 276 × 268 × 68 mm
- Stored as
- folded. Published dimensions exclude the battery grip, camera and tripod: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 70 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI RS 3 Pro’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Gimbal folded with battery grip removed, without camera or tripod. These dimensions do not describe the assembled gimbal.
Size and price
The pocket cut for the DJI RS 3 Pro
In the L case, the foam is cut at 277 × 285 mm on the floor for the DJI RS 3 Pro: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 70 mm deep.
- Pocket footprint
- 277 × 285 mm
- Pocket depth
- 70 mm
- Foam under the pocket
- 105 mm
- Space left along the length
- 236 mm
- Space left across the width
- 105 mm
- Share of the inside volume used
- 12.1 %
Margins: inside of the L case (513 × 390 × 229 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | dji.com | 276 × 268 × 68 mm | — | the battery grip, camera and tripod |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the DJI RS 3 Pro: + larger, − smaller.
The DJI RS 5 measures 47.5 mm more in height than the DJI RS 3 Pro. Same recommended case size for both: the L.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| DJI RS 5 | −17.5 | −20.5 | +47.5 | L |
| DJI RS 3 Mini | +47 | −73 | +30 | M |
| DJI Osmo Mobile 8P | −80 | −163 | −30 | S |
| DJI RS 4 Pro | +13.5 | −100.5 | +199 | L |
Often stored with the DJI RS 3 Pro
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Foamd film-set multi-tool
Sold with its pocket, €24 · 125 × 55 mm
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI RS 3 Pro case
- Which case size for the DJI RS 3 Pro?
- On its own, the DJI RS 3 Pro fits in the L case (513 × 390 × 229 mm inside), at €379 for case and foam, delivery included. Its pocket is 70 mm deep in 175 mm foam.
- How much clearance does the foam leave around the DJI RS 3 Pro?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.