Compact cameras
Insta360 Luna Pro hard case with custom foam
The short answer
The Insta360 Luna Pro measures 155.7 × 52.8 × 38.5 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
Video camera hard cases with custom foam
- Dimensions used
- 155.7 × 52.8 × 38.5 mm
- Stored as
- as is. Published dimensions exclude the protective cover and external accessories: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Weight
- 215 g
- Pocket depth
- 41 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your Insta360 Luna Pro’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
Start from a kit with the Insta360 Luna Pro
Take the set closest to yours, then adjust it in the configurator.
Full kit
- Insta360 Luna Pro
- SD card wallet
- Pocket: crab clamp
- Pocket: small magic arm (3 to 5 in)
- Samsung T7
- Insta360 Mic (charging case)
- Pocket: smartphone
M all-round case, €259
How it is stored
The dimensions describe the camera alone. Switch it off before storing it. If you keep a protective cover or handle attached, measure the complete assembly: do not put pressure on the gimbal axes.
Size and price
The pocket cut for the Insta360 Luna Pro
In the S case, the foam is cut at 62 × 165 mm on the floor for the Insta360 Luna Pro: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 41 mm deep.
- Pocket footprint
- 62 × 165 mm
- Pocket depth
- 41 mm
- Foam under the pocket
- 61 mm
- Space left along the length
- 238 mm
- Space left across the width
- 62 mm
- Share of the inside volume used
- 4.7 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | onlinemanual.insta360.com | 155.7 × 52.8 × 38.5 mm | 215 g | the protective cover and external accessories |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the Insta360 Luna Pro: + larger, − smaller.
The Insta360 Luna Ultra measures 14 mm more in length than the Insta360 Luna Pro. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Weight (g) | Recommended case |
|---|---|---|---|---|---|
| Insta360 Luna Ultra | +14 | −0.5 | 0 | +18 | S |
| Insta360 X5 | −31 | −7 | −0.5 | −15 | S |
| Insta360 X4 | −32 | −7 | −1 | — | S |
| Insta360 X3 | −41.5 | −7 | −5.5 | — | S |
Often stored with the Insta360 Luna Pro
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Questions about the Insta360 Luna Pro case
- Which case size for the Insta360 Luna Pro?
- On its own, the Insta360 Luna Pro fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 41 mm deep in 102 mm foam.
- How much clearance does the foam leave around the Insta360 Luna Pro?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.