Drones
Custom case for DJI Lito X1
On its own, the DJI Lito X1 fits in the S compact case, in a pocket cut to its dimensions.
You receive the case and its cut foam; the gear is not included. From €189, delivery included, in 5 to 6 weeks (4 to 5 with express, +€8). That time goes into cutting your foam to your gear’s dimensions, checking every layout, then shipping it.
Build my case with just the DJI Lito X1- Dimensions used
- 150 × 98 × 68 mm
- Stored as
- folded, propellers folded: +6 mm of length and height, +4 mm of width (DJI gives +3.2 mm of height with propellers on the Mavic 4 Pro)
- Dimension reliability
- Probable dimensions 66/100
- Clearance left in the foam
- 3.5 mm per side
- Weight
- 249 g
- Pocket depth
- 70 mm
- Delivered cases
- no delivered case recorded for this gear yet The layout is computed from the dimensions; a delivery alone is not a documented physical fit test.
- Sources
- manufacturer spec sheet, retailer
The documents give the manufacturer’s dimensions. The layout dimensions may include the storage adjustments shown above.
The dimensions agree across several sources; they become “verified” after our own measurement or fit feedback.
How it is stored
The drone is held folded, propellers folded and gimbal guard on; the battery stays in the aircraft.
Size and price
Often stored with the DJI Lito X1
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI Lito X1 case
- Which case size for the DJI Lito X1?
- On its own, the DJI Lito X1 fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 70 mm deep in 102 mm foam.
- How much clearance does the foam leave around the DJI Lito X1?
- 3.5 mm per side. The dimensions agree between the manufacturer’s sheet and another source; they become “verified” after our own measurement.
- Does the case for the DJI Lito X1 fit as cabin baggage?
- By dimensions: the S case measures 34 × 29.5 × 15 cm overall, handle and latches included. It fits the 55 × 40 × 23 cm cabin size, a reference size, and the 55 × 35 × 25 cm size. Acceptance also depends on weight, your ticket and your airline’s rules.
- What about the DJI Lito X1’s batteries on a plane?
- These pointers concern spare rechargeable lithium-ion batteries for cameras and drones, not power banks. Keep them in the cabin, each with its contacts protected. Up to 100 Wh per battery, check the airline’s conditions. Above 100 Wh and up to 160 Wh, its prior approval is required. In the United States, the FAA limits this range to two spares per person. For every flight, also check the total number allowed, whatever the batteries’ energy. Above 160 Wh, these batteries are not accepted in ordinary passenger baggage.
- What if my DJI Lito X1 has accessories mounted?
- The layout follows the DJI Lito X1’s dimensions, stored as shown on this page. A cage, a handle or a filter changes the footprint: add them in the configurator, or enter your own measurements, and the pocket is recalculated.