Drones
DJI Mini 3 Pro hard case with custom foam
The short answer
The DJI Mini 3 Pro measures 145 × 90 × 62 mm. On its own it fits the S compact case: €189, case and cut foam included, delivery included, in 4 to 6 weeks.
The gear is not included.
- Cutting plan approved by you before production
- Delivery included, with tracking number
- Two-year legal guarantee of conformity
- Secure payment by Shopify
DJI drone case: which hard case for your drone?
Drone hard cases with custom foam
- Dimensions used
- 145 × 90 × 62 mm
- Stored as
- folded. Published dimensions exclude propellers and transport guards: confirm your measurements before cutting.
- Dimension reliability
- To confirm 36/100
- Clearance left in the foam
- 4.5 mm per side
- Pocket depth
- 64 mm
- Delivered cases
- no delivered case recorded for this gear yet
- Sources
- manufacturer spec sheet
Our sources are not yet enough to guarantee these dimensions to the millimetre: we will ask you to check your DJI Mini 3 Pro’s measurements before cutting, and we leave a little more clearance.
How to read these dimensions, their sources and their reliability: see the FAQ
How it is stored
Drone folded. Propellers and transport guards may extend beyond the published dimensions: measure your device as stored.
Size and price
The pocket cut for the DJI Mini 3 Pro
In the S case, the foam is cut at 99 × 154 mm on the floor for the DJI Mini 3 Pro: its dimensions used plus 4.5 mm of clearance on each side. The pocket goes 64 mm deep.
- Pocket footprint
- 99 × 154 mm
- Pocket depth
- 64 mm
- Foam under the pocket
- 38 mm
- Space left along the length
- 201 mm
- Space left across the width
- 73 mm
- Share of the inside volume used
- 10.9 %
Margins: inside of the S case (300 × 227 × 132 mm) minus the pocket.
Where these dimensions come from
One line per source consulted. The cut adds the storage margin to it.
| Type | Website | Published dimensions | Weight | What the dimensions leave out |
|---|---|---|---|---|
| manufacturer spec sheet | dji.com | 145 × 90 × 62 mm | — | propellers and transport guards |
- No cross-check possible: a single source describes these dimensions in the same state.
Compared with similar models
Gap = dimension of the nearby model minus that of the DJI Mini 3 Pro: + larger, − smaller.
The DJI Mini 4K measures 5 mm less in width than the DJI Mini 3 Pro. Same recommended case size for both: the S.
| Model | Length (mm) | Width (mm) | Height (mm) | Recommended case |
|---|---|---|---|---|
| DJI Mini 4K | −1 | −5 | +2 | S |
| DJI Lito X1 | +5 | +8 | +6 | S |
| DJI Mini 3 | +9 | +4 | +6 | S |
| DJI Mini 2 | −7 | −9 | −4 | S |
Often stored with the DJI Mini 3 Pro
Where foam is left over, the configurator suggests a pocket of the right size. Nothing is added by default.
Spare batteries
Empty pocket for your own, at no extra cost · 90 × 60 mm
Foamd SD card wallet
Sold with its pocket, €12 · 115 × 85 mm
Charger
Empty pocket for your own, at no extra cost · 110 × 75 mm
Cables and adapters
Empty pocket for your own, at no extra cost · 130 × 90 mm
Questions about the DJI Mini 3 Pro case
- Which case size for the DJI Mini 3 Pro?
- On its own, the DJI Mini 3 Pro fits in the S case (300 × 227 × 132 mm inside), at €189 for case and foam, delivery included. Its pocket is 64 mm deep in 102 mm foam.
- How much clearance does the foam leave around the DJI Mini 3 Pro?
- 4.5 mm per side. Our sources are not yet enough to guarantee them to the millimetre: we will ask you to check your measurements before cutting.